Skateboard Ramp

First , measure the rectangular size of plywood that you would like to use (I chose an 8ft piece) and cut 3 pieces of sawn timber the same length as the plywood. Then drill them equal an distance away from each other As seen in the photo.

Next , cut 2 pieces of dawn timber the same width as the plywood and drill them to the side of the plywood which you would like to be the top , across the 3 support beams cut before.

After you have screwed the back together and it is sturdy, screw a small piece of wood to the top of the back.

After you are happy with the ramp, you can colour or spray paint any design that you like, as long as the paint is suitable. Firstly , I spray painted a layer of black on the angled area and a yellow layer on the top (as seen on the first photo ). Then I taped diagonal striped lines on the top and spray painted them black. Creating the yellow and black pattern on the top. I then taped a line around an inch and a half away from the sides and from the middle. Then I spray painted it blue.