Candle Holder

Play
PlayPause
 
Cian Cornally avatar
Video made by Cian Published on 07/01/2020, viewed by 1800

This project is a nice center piece on your table.

What you will need

any type of wood you like. the sizes are in the picture below.

How to do this project

1

Play
. So just follow this picture.

This is the main piece. You can make your own design around this like I did. So just follow this picture.

2

Play
y I like the darker woods e.g wall nut. The pieces should be around the size of your pinkie finger

Get 3 small square pieces what ever type of wood is up to you but personally I like the darker woods e.g wall nut. The pieces should be around the size of your pinkie finger

3

Play

Next drill a hole the size of the small candles you want to put in it

4

Play
ng on your design but it is 22mm thick.

You can add a base plate if you want. It can be as long as you want depending on your design but it is 22mm thick.

5

Then sand it down so it’s is smooth. It has to be even at the bottom if your using a base plate so it looks nice when you glue them together

6

Glue everything together and let it dry. Hope this helps

Comments

Avatar placeholder