Beer Cap Catcher

The most used tool in my shop

 
Shawn Stewart avatar
Shawn StewartPublished on 11/21/2016

Got tired of picking up on my beer caps on the floor and I wanted to try out wood burning for the first time and I thought this was the perfect project

viewed by 517

2 Comments

What you will need

1 1x6 6 foot i used poplar board you can use whatever you'd like

Wood glue

12 pocket hole screws

Wood burning tool

Sandpaper

Wipe on poly

Graphite paper to transfer image to Wood

How to do this project

1

Cut 4 boards to desired size and sand it to desired finish

2

Place graphite paper on board tape image to board and Trace image with pencil

Place graphite paper on board tape image to board and Trace image with pencil

3

Use your wood burning tool and burning image

Use your wood burning tool and burning image

4

Build a box with wood glue and pocket holes sand down the seams of the box

Build a box with wood glue and pocket holes sand down the seams of the box

5

Add on two coats of wipe on polyurethane or your favorite finish and attach to wall under your beer bottle opener

Add on two coats of wipe on polyurethane or your favorite finish and attach to wall under your beer bottle opener