Knick Knack Display Shelf
Scrap Wood Project
What you will need
2x6
pallet wood
How to do this project
1
![Then then used the table saw to cut slots for the two shelves, glued up and assembled!](https://craftlog.global.ssl.fastly.net/m/ve/b64-8888607-1585689063022-b3B0aW1pemVGb3I9ZGVza3RvcGhoZCZsYW5ndWFnZVRhZz1lbi1VUyZyZW5kZXJDbGlwU3RhcnQ9MSZyZW5kZXJDbGlwU2l6ZT0x.jpg)
I cut the pieces to size and planed everything down to the same thickness. Then then used the table saw to cut slots for the two shelves, glued up and assembled!
2
![plied the brand and sanded. Then added a coat of wipe on poly.](https://craftlog.global.ssl.fastly.net/m/ve/b64-8888607-1585689063022-b3B0aW1pemVGb3I9ZGVza3RvcGhoZCZsYW5ndWFnZVRhZz1lbi1VUyZyZW5kZXJDbGlwU3RhcnQ9MiZyZW5kZXJDbGlwU2l6ZT0x.jpg)
After the wood glue was set and dried, I wood burned the entire project, applied the brand and sanded. Then added a coat of wipe on poly.
Comments