Picnic Table Benches

👍   32
 
Christopher Lee Fischer avatar
Christopher Lee Fischer Published on 06/15/2019, viewed by 2593 , 0 Comments

What you will need

2-8FT 4x4, 2-8FT 2x6, 2-8FT 2x4, 4-FT 1x4

How to do this project

1

n between 4x4. Then cut 1x4 to 8.5in, you’ll need 6 of those as supports for seats.Next cut 2x6 in to 4FT lengths. Screw in to the 1x4 that should be nailed down to your 4x4 posts and one in the middle of the 2x4 support beam. Then take 1x4 and cut 4- 51in lengths as trims, and 4-2x4 to 8 1/2in lengths for the end side trim and nail gun or wood screw them in.

Cut 4x4 to 15 1/2 inches, then cut 2x4 to 45 inches, screw 2x4 as support in between 4x4. Then cut 1x4 to 8.5in, you’ll need 6 of those as supports for seats.Next cut 2x6 in to 4FT lengths. Screw in to the 1x4 that should be nailed down to your 4x4 posts and one in the middle of the 2x4 support beam. Then take 1x4 and cut 4- 51in lengths as trims, and 4-2x4 to 8 1/2in lengths for the end side trim and nail gun or wood screw them in.

How to make

Furniture

Table

Bench

Picnic Table

Picnic

Comments

Avatar placeholder