Polynesian Tables

end table

 
denzel avatar
denzelPublished on 10/19/2016

first time doing a Polynesian tribal design on one of my tables, just doing a test run buy wanted to share with you guys!

viewed by 838

3 Comments

What you will need

pallets, 2 1/2 inch screws, 4 inch bolts, , 2x4s, paint, saw, drill gun,

How to do this project

1

it's your pretty basic end table. I put a 2x4 in the middle of the top table frame in which I was able to bolt in the aspen tree stumps for the legs n bolted the other side to the bottom frame as well..
it's your pretty basic end table. I put a 2x4 in the middle of the top table frame in which I was able to bolt in the aspen tree stumps for the legs n bolted the other side to the bottom frame as well..
it's your pretty basic end table. I put a 2x4 in the middle of the top table frame in which I was able to bolt in the aspen tree stumps for the legs n bolted the other side to the bottom frame as well..
it's your pretty basic end table. I put a 2x4 in the middle of the top table frame in which I was able to bolt in the aspen tree stumps for the legs n bolted the other side to the bottom frame as well..

it's your pretty basic end table. I put a 2x4 in the middle of the top table frame in which I was able to bolt in the aspen tree stumps for the legs n bolted the other side to the bottom frame as well..

2

after using clear satin and gloss finish
after using clear satin and gloss finish

after using clear satin and gloss finish