Pine Shoe Rack
- minimum 40mm, 2×1.5m by 25cm pine, 10×80cm by 5cm
- cordless drill, philips head screw bit, 3mm countersink drill peice, 180 grit abrasive paper
- sanding block, finishing wax, orbital sander
Table with Maple Flooring and Gas Pipe Legs
- 120 grit sand paper
- Maple flooring
- Gas pipes
- Top coat
- 4 more materials...
Walnut Slab Sink
with epoxy coating
- 120 grit sand paper
- 80 grit sand paper
- Thick Walnut slab
- Epoxy top coat
- 3 more materials...
Rolling Deck Cooler
1-2 day build for beginners
- 120 Grit Sand Paper
- Table Saw
- Miter Saw or Circular Saw
- 2" Deck Screws
- 15 more materials...
Fire Pit Coffee Table with Matching Bench
coffee table/matching bench
- 60, 80, 220 grit sandpaper
- 4x4 lumber
- router
- miter saw
- 20 more materials...
Code Compliant Stairs Pt 2
And then there were two!..
- boots and some grit!
Glass Panel Room Dividers
Pine frames with repro antique glass inserts
- Reproduction antique glass panels
- 6/4 pine boards
Cypress Tv Stand
Wife's tv stand
- sandpaper 80, 120, 220 grit
- cypress hardwood
- 3/4 cypress plywood
- 5/8 birch plywood
- 14 more materials...
Christmas Tree Ornament
- finished with 120, 220, 320 grit sand paper. coated in small am...
- lathe. tools. wood
L Shape Desk
Hairpin Legs
- 4-8ft 2x10 (use a hard wood) Lacquer, sandpaper, and wetordry sandpaper 800, 1500, 2000 grit...
- 6- hairpin legs
Cutting Boards
Mel’s Christmas Present
- cut, glue, clamp, plane, and sand sand and sand some more. I start with 80 grit...
- walnut and maple
Raised Panel Half Door
Proper Doors
- 6/4 or 8/4 lumber (approximately 45 b/f)
- Router and router table
- entry door router bit set ( I prefer the sets from Infinity Cutting Tools)
- Sharp Chisels
- 1 more materials......