Pine Shoe Rack
- minimum 40mm, 2×1.5m by 25cm pine, 10×80cm by 5cm
- cordless drill, philips head screw bit, 3mm countersink drill peice, 180 grit abrasive paper
- sanding block, finishing wax, orbital sander
Kids Table and Chairs
Kids Table and Chairs
- 2-1x12x12 Box Chairs wheels
- 2-2x3 Legs
- 1-1x4 skirt of table
- some 1x4 for the table top
- 1 more materials......
Loft Bed
kids loft bed
- 2x4x8
- 2x6x8
- 2x2x8
- 2 1/2" Pocket Screws
- 1 more materials......
Kids Table
- 32" x 18" of 3/4 in plywood
- (4) 1-1/2" Square Table Legs (length to height of table-recommend 22")
- (4) Metal Table Leg Straight Top Plate
- 3/4" trim if not using router for edges
- 1 more materials......
Table with Maple Flooring and Gas Pipe Legs
- Maple flooring
- Gas pipes
- Top coat
- 120 grit sand paper
- 4 more materials......
Monterey Pine Table Top
with live edge
- 1 large monteray pine slab
- 1 quart emmets good stuff finishing
- as needed paste finishing wax
Walnut Slab Sink
with epoxy coating
- Thick Walnut slab
- Epoxy top coat
- Oil based top coat
- 80 grit sand paper
- 3 more materials......
Gas Pipe Tv Stand
with sycamore and maple slabs
- Sycamore slab
- Maple slab
- Seal-a-seal wood sealer
- Sandpaper
- 4 more materials......
Fighter Plane
Small toy plane
- Wood (i used 3 types: body, wings, rear wings)
- Sand paper
- Sanding machine
- Vise
- 7 more materials......
Clever Handle
Making a handle for an old clever
- Old blade
- Wood scrap
- Glue
- Pins
- 7 more materials......
FOLDING SAWHORSE
Useful Project
- Plywood some screws and 4 door hinges a jigsaw and a drill and a flat bit hole cutter saves a bit of time
Dining Table
41"x64"
- Old reclaimed barn wood.
- 1x4 Mohogany, red and white for legs and edge.
- 2-1/2" wood screws
- Decorative angle brackets for legs
- 5 more materials......
