Diy Angle Grinder Stand
Cut-off table and stand
- You need a food warmer; butterfly hinged; rebits; drill; dremel
First Project as Woodworker -- Console Cabinet Table
Rose wood and Mahogany console table
- Rosewood Panels
- Mahogany Panels
- Quarter inch plywood for the backing
- Lemon oil for finishing
- 1 more materials......
Homemade Table Saw
Looks ugly but works well
- Circular saw
- Scrap wood
Shop Cabinets
shop organization
- 3/4 ply about 5 sheets
- some walnut for handles
- Poplar for face frames and doors
- 1 sheet of 1/2 ply
Table with Maple Flooring and Gas Pipe Legs
- Maple flooring
- Gas pipes
- Top coat
- 120 grit sand paper
- 4 more materials......
Monterey Pine Table Top
with live edge
- 1 large monteray pine slab
- 1 quart emmets good stuff finishing
- as needed paste finishing wax
Walnut Slab Sink
with epoxy coating
- Thick Walnut slab
- Epoxy top coat
- Oil based top coat
- 80 grit sand paper
- 3 more materials......
Gas Pipe Tv Stand
with sycamore and maple slabs
- Sycamore slab
- Maple slab
- Seal-a-seal wood sealer
- Sandpaper
- 4 more materials......
Fighter Plane
Small toy plane
- Wood (i used 3 types: body, wings, rear wings)
- Sand paper
- Sanding machine
- Vise
- 7 more materials......
Clever Handle
Making a handle for an old clever
- Old blade
- Wood scrap
- Glue
- Pins
- 7 more materials......
FOLDING SAWHORSE
Useful Project
- Plywood some screws and 4 door hinges a jigsaw and a drill and a flat bit hole cutter saves a bit of time
Dining Table
41"x64"
- Old reclaimed barn wood.
- 1x4 Mohogany, red and white for legs and edge.
- 2-1/2" wood screws
- Decorative angle brackets for legs
- 5 more materials......
