Pine Shoe Rack
- minimum 40mm, 2×1.5m by 25cm pine, 10×80cm by 5cm
- cordless drill, philips head screw bit, 3mm countersink drill peice, 180 grit abrasive paper
- sanding block, finishing wax, orbital sander
Video made by Jake's
I Made a Crib for My First Baby White Oak An Walnut
Video made by Dillon
Groot Cnc Carving
Baby Groot CNC carving for sister's birthday gift
- wood of choice
- CNC
- glue
- vacuum press
- 1 more materials......
Video made by Zack
Table with Maple Flooring and Gas Pipe Legs
- Maple flooring
- Gas pipes
- Top coat
- 120 grit sand paper
- 4 more materials......
Video made by Rafael
Monterey Pine Table Top
with live edge
- 1 large monteray pine slab
- 1 quart emmets good stuff finishing
- as needed paste finishing wax
Video made by Rafael
Walnut Slab Sink
with epoxy coating
- Thick Walnut slab
- Epoxy top coat
- Oil based top coat
- 80 grit sand paper
- 3 more materials......
Video made by Rafael
Gas Pipe Tv Stand
with sycamore and maple slabs
- Sycamore slab
- Maple slab
- Seal-a-seal wood sealer
- Sandpaper
- 4 more materials......
Video made by Rafael
Fighter Plane
Small toy plane
- Wood (i used 3 types: body, wings, rear wings)
- Sand paper
- Sanding machine
- Vise
- 7 more materials......
Video made by Thiago
Clever Handle
Making a handle for an old clever
- Old blade
- Wood scrap
- Glue
- Pins
- 7 more materials......
Video made by Thiago
FOLDING SAWHORSE
Useful Project
- Plywood some screws and 4 door hinges a jigsaw and a drill and a flat bit hole cutter saves a bit of time
Video made by Asif
Dining Table
41"x64"
- Old reclaimed barn wood.
- 1x4 Mohogany, red and white for legs and edge.
- 2-1/2" wood screws
- Decorative angle brackets for legs
- 5 more materials......
Video made by David
Restored Farm Sign
A simple mount board for a classic sign
- 3/4" plywood
- Black 1-1/4" wood screws
- A sign to mount
- Clearcoat wood sealant
- 1 more materials......
Video made by David
Page 1 out of 22