Pine Shoe Rack
- minimum 40mm, 2×1.5m by 25cm pine, 10×80cm by 5cm
- cordless drill, philips head screw bit, 3mm countersink drill peice, 180 grit abrasive paper
- sanding block, finishing wax, orbital sander
Table with Maple Flooring and Gas Pipe Legs
- Wood glue
- Maple flooring
- Gas pipes
- Top coat
- 4 more materials...
Monterey Pine Table Top
with live edge
- 1 large monteray pine slab
- 1 quart emmets good stuff fini...
- as needed paste finishing wax
Walnut Slab Sink
with epoxy coating
- Thick Walnut slab
- Epoxy top coat
- Oil based top coat
- 80 grit sand paper
- 3 more materials...
Gas Pipe Tv Stand
with sycamore and maple slabs
- Seal-a-seal wood sealer
- Maple slab
- Sycamore slab
- Sandpaper
- 4 more materials...
Fighter Plane
Small toy plane
- Wood (i used 3 types: body, wings, rear wings)
- Sand paper
- Sanding machine
- Vise
- 7 more materials...
Clever Handle
Making a handle for an old clever
- Wood scrap
- Old blade
- Glue
- Pins
- 7 more materials...
FOLDING SAWHORSE
Useful Project
- Plywood some screws and 4 door hinges a jigsaw and a drill and ...
Dining Table
41"x64"
- Half-inch plywood board
- Walnut stain for base
- 2x4 pine boards
- 2-1/2" wood screws
- 5 more materials...
Restored Farm Sign
A simple mount board for a classic sign
- Clearcoat wood sealant
- Black 1-1/4" wood screws
- 3/4" plywood
- A sign to mount
- 1 more materials...
Saloon Doors
- Wood screws
- Some old barn doors
Walnut Table Clock
- Some walnut wood
- Glue
- Some cool looking sticky numbe...
- Clock motor and hands