Table with Maple Flooring and Gas Pipe Legs
- Maple flooring
- Gas pipes
- Top coat
- 120 grit sand paper
- 4 more materials......
Walnut Slab Sink
with epoxy coating
- Thick Walnut slab
- Epoxy top coat
- Oil based top coat
- 80 grit sand paper
- 3 more materials......
Rolling Deck Cooler
1-2 day build for beginners
- Table Saw
- Miter Saw or Circular Saw
- 2" Deck Screws
- 2.5" Deck Screws
- 15 more materials......
Fire Pit Coffee Table with Matching Bench
coffee table/matching bench
- 4x4 lumber
- router
- miter saw
- plainer
- 20 more materials......
Code Compliant Stairs Pt 2
And then there were two!..
- boots and some grit!
Glass Panel Room Dividers
Pine frames with repro antique glass inserts
- 6/4 pine boards
- Reproduction antique glass panels
Cypress Tv Stand
Wife's tv stand
- cypress hardwood
- 3/4 cypress plywood
- 5/8 birch plywood
- table saw
- 14 more materials......
L Shape Desk
Hairpin Legs
- 4-8ft 2x10 (use a hard wood) Lacquer, sandpaper, and wetordry sandpaper 800, 1500, 2000 grit
- 6- hairpin legs
Cutting Boards
Mel’s Christmas Present
- walnut and maple
- cut, glue, clamp, plane, and sand sand and sand some more. I start with 80 grit and work my way thro
Raised Panel Half Door
Proper Doors
- 6/4 or 8/4 lumber (approximately 45 b/f)
- Router and router table
- entry door router bit set ( I prefer the sets from Infinity Cutting Tools)
- Sharp Chisels
- 1 more materials......
Decorative Ladder Shelf
Stained to look Weathered
- Premium oak ply wood
- Premium oak 1" x 4"
- Premium oak 1" x 2"
- 3 1/4" #8 wood screws
- 12 more materials......
Custom Kitchen Island with Butcher Block Top
First comes the top...
- 150 ft of 3/4 in hardwood face boards
- 1 gallon Titebond 3 wood glue
- 27000 clamps, ranging from 12 inch to 48 inch
- Block and surface planers, varying grits off sandpaper
- 2 more materials......
